Skip to main content

Reliable and sustainable micro-hydropower in Nepal

Rolling hills of Baglung District

Despite massive potential to generate electricity through large scale hydropower, Nepal often faces power cuts and the national grid only reaches around 65% of the population. Much of the non-grid connected population live in rural, hilly and mountainous areas where grid extension is difficult and costly. Micro-hydropower plants (MHPs), which deliver up to 100kW of electrical power, extract water from rivers and use it to drive a generator before returning the water to the same river further downstream. These systems can provide electricity for lighting and productive end uses that can vastly improve people’s quality of life. Since the 1970s, micro-hydro turbines have been manufactured in Nepal. Now there are around 2,500 MHPs installed across Nepal.


When these systems break or run poorly it has an adverse effect on the quality of people’s lives. Through my research, I am hoping to find methods to improve the reliability and sustainability of MHPs in Nepal. The aim of this project was to see how well systems were maintained and interview the people who run, manage and rely on hydropower plants. I hoped that interviews would help me to understand some of the technical and social challenges that MHPs face.  Whilst in Nepal, I was working with a Nepali NGO called the People, Energy and Environment Development Association (PEEDA) who helped me to identify sites, arrange visits and conduct interviews.

A micro-hydropower plant

During my time in Nepal, Prem Karki (from PEEDA) and I visited a total of 17 sites in the neighbouring districts of Baglung and Gulmi. Prem and I spent 12 days in the field, making our way from one site to the next via bumpy jeep rides and on foot. Nepal’s hills make it suitable for hydropower but also make travelling complicated. Many of the roads we travelled on were unpaved and we saw lots of places where landslides had damaged roads during the monsoon. This showed us how difficult it is to move equipment and materials when plants are under construction. At each site, our visual assessment took us on some nerve jangling walks along canals that snaked around cliff edges to reach the intakes. Prem was responsible for interviewing the plant operator, management representative and consumer at each site so we could understand how plants were maintained, managed and their importance to beneficiaries. The local people were very helpful and interested by our work. We were often given free meals and sometimes even a place to stay!

A winding canal
I was able to collect a large amount of information which I am still processing digitally and mentally! In general, I found that micro-hydro sites are often impressive feats of engineering which can make a big impact on people’s lives by powering homes, businesses and services. In challenging environments where the only means of transportation is manpower, the hard work of local people has led to their construction. Several times, we crawled through hand chiselled caves made solely for a hydro project’s canal. The impact of the projects was clear to see. Every interview respondent said that connection to an MHP had made their life easier.

Furthermore, the micro-hydro projects are invaluable to communities as a whole; they power workplaces, shops, health posts and mobile phone masts. In the town of Burtibang, with a population of around 10,000, every home and business is powered by electricity from micro-hydro projects.

This dependence on micro-hydropower makes its reliability very important. I found the quality of maintenance very variable. Some sites were well cared for with an evident daily effort to keep the plant running as best as possible. Other plants had little evidence of regular maintenance and were showing signs of deterioration. Promisingly, I found that sites with formally trained operators tended to be better maintained than those without.

In terms of sustainability, there was a good standard of management. Energy meters allowed accurate measurement of electricity consumption so that consumers were charged according to their use. Consumers are typically given a short window in which to pay and fined for late payment. At most sites, managers said that there was sufficient money collected for the operation of the plant and maintenance costs.

To maintain reliability and sustainability, there are a range of technical and social issues that MHPs must overcome. There were common technical issues in design. Many turbines were leaking, and plant operators mentioned bearing replacement as one of the most common issues. We also saw a big variation in the quality of  installations particularly for the  civil works. It is disappointing that despite the massive effort expended in construction, some features are not fit for purpose. Socially, we found four sites where the original operator had moved abroad for work meaning the present operator had not been trained. Plant managers also commented on the increasing demand from consumers resulting in pressure on operators to deliver more power. These issues develop for social reasons but result in problems which can harm the reliability of the system. 
A micro-hydropower turbine

In my further research, I intend to work closely with a turbine manufacturer during the design, manufacture and installation of a micro-hydro project. I hope to identify opportunities to implement greater quality control to prevent the occurrence of the technical issues mentioned. By working in collaboration with governmental and non-governmental organisations in Nepal, I would like to find innovative ways to ensure the longevity of MHPs. As Nepal develops, the role of micro-hydro will change but I believe it still has an important role to play in rural electrification. 

----------------------------------
This blog is written by Cabot Institute member Joe Butchers, a PhD student from the Electrical Energy Management Group at the University of Bristol.
Joe Butchers

Popular posts from this blog

Converting probabilities between time-intervals

This is the first in an irregular sequence of snippets about some of the slightly more technical aspects of uncertainty and risk assessment.  If you have a slightly more technical question, then please email me and I will try to answer it with a snippet. Suppose that an event has a probability of 0.015 (or 1.5%) of happening at least once in the next five years. Then the probability of the event happening at least once in the next year is 0.015 / 5 = 0.003 (or 0.3%), and the probability of it happening at least once in the next 20 years is 0.015 * 4 = 0.06 (or 6%). Here is the rule for scaling probabilities to different time intervals: if both probabilities (the original one and the new one) are no larger than 0.1 (or 10%), then simply multiply the original probability by the ratio of the new time-interval to the original time-interval, to find the new probability. This rule is an approximation which breaks down if either of the probabilities is greater than 0.1. For example

1-in-200 year events

You often read or hear references to the ‘1-in-200 year event’, or ‘200-year event’, or ‘event with a return period of 200 years’. Other popular horizons are 1-in-30 years and 1-in-10,000 years. This term applies to hazards which can occur over a range of magnitudes, like volcanic eruptions, earthquakes, tsunamis, space weather, and various hydro-meteorological hazards like floods, storms, hot or cold spells, and droughts. ‘1-in-200 years’ refers to a particular magnitude. In floods this might be represented as a contour on a map, showing an area that is inundated. If this contour is labelled as ‘1-in-200 years’ this means that the current rate of floods at least as large as this is 1/200 /yr, or 0.005 /yr. So if your house is inside the contour, there is currently a 0.005 (0.5%) chance of being flooded in the next year, and a 0.025 (2.5%) chance of being flooded in the next five years. The general definition is this: ‘1-in-200 year magnitude is x’ = ‘the current rate for eve

Coconuts and climate change

Before pursuing an MSc in Climate Change Science and Policy at the University of Bristol, I completed my undergraduate studies in Environmental Science at the University of Colombo, Sri Lanka. During my final year I carried out a research project that explored the impact of extreme weather events on coconut productivity across the three climatic zones of Sri Lanka. A few months ago, I managed to get a paper published and I thought it would be a good idea to share my findings on this platform. Climate change and crop productivity  There has been a growing concern about the impact of extreme weather events on crop production across the globe, Sri Lanka being no exception. Coconut is becoming a rare commodity in the country, due to several reasons including the changing climate. The price hike in coconuts over the last few years is a good indication of how climate change is affecting coconut productivity across the country. Most coconut trees are no longer bearing fruits and thos